Olá pessoal, queria alterar o layout do /var/log/cups/page_log

então, o q eu achei foi q basta adicionar a linha abaixo no /etc/cups/cupsd.conf

PageLogFormat %p %u %j %T %P %C %{job-billing} %{job-originating-host-name} %{job-name} %{media} %{sides}

e apos reiniciado o serviço e até a maquina não deu nenhum resultado !

alguém sabe algo ?

grato qq ajuda

Obrigado Manoel,

fazendo isso resolve

mas volta a acontecer,

o mais intrigante é q não é toda hora q isso acontece imprime normalmente, e do nada ele coloca a linha

fiz até um script para verificar e tirar essa linha (qdo aparecer) do printers.conf e restartar o cups, mas acabou me trazendo outros problemas...

olá, as vezes ao mandar uma impressão do windows ele não imprime e coloca a linha

AuthInfoRequired username,password

no /etc/cups/printers.conf

da impressora em questão, para voltar a imprimir normalmente tem q remover essa linha e restartar o cups

alguem conseguiu resolver isso ?

grato qq ajuda

Olá pessoal, tenho meu server Mandriva Linux release 2009.1 (Official) for x86_64
e instalei o Firefox 14 dentro de /opt e ele roda blz, mas não lista as impressoras da rede !

o Firefox instalado da distro lista normalmente !

alguem sabe o q acontece ?
grato qq ajuda

Memória esta ok, esse erro vem todos os dias depois das 16:00 e quem mostra ele é o klogd

no /var/log/messages

Aug 29 17:12:33 servidor5 klogd: ------------[ cut here ]------------
Aug 29 17:12:33 servidor5 klogd: WARNING: at fs/notify/inotify/inotify_fsnotify.c:129 idr_callback+0x43/0x70()
Aug 29 17:12:33 servidor5 klogd: Hardware name: S3210SH
Aug 29 17:12:33 servidor5 klogd: inotify closing but id=0 for entry=ffff8801ee88cbd0 in group=ffff880203c2ec00 still in idr.  Probably leaking memory
Aug 29 17:12:33 servidor5 klogd: Modules linked in: iptable_filter ip_tables x_tables af_packet pcspkr serio_raw i2c_i801 i2c_core sg e1000 iTCO_wdt iTCO_vendor_support e1000e coretemp binfmt_misc ipmi_si ipmi_msghandler joydev usbhid cypress_m8 usbserial hid floppy thermal button processor evdev ehci_hcd uhci_hcd usbcore ata_generic ide_pci_generic ide_gd_mod ide_core pata_acpi ahci ata_piix libata sd_mod scsi_mod crc_t10dif ext3 jbd
Aug 29 17:12:33 servidor5 klogd: Pid: 8431, comm: gam_server Not tainted 2.6.31.5-server-1mnb #1
Aug 29 17:12:33 servidor5 klogd: Call Trace:
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff8115a183>] ? idr_callback+0x43/0x70
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff8105f2c0>] warn_slowpath_common+0x80/0xd0
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff8105f399>] warn_slowpath_fmt+0x69/0x70
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff813a3f6e>] ? wait_for_common+0x15e/0x180
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff8115a183>] idr_callback+0x43/0x70
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff811eba43>] idr_for_each+0x83/0xe0
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff8115a140>] ? idr_callback+0x0/0x70
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff81157bac>] ? fsnotify_put_event+0x4c/0x70
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff8115a127>] inotify_free_group_priv+0x27/0x40
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff81157d38>] fsnotify_final_destroy_group+0x28/0x40
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff81157e41>] fsnotify_put_group+0x91/0xb0
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff8115a3b4>] inotify_release+0x34/0x50
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff8112633f>] __fput+0xdf/0x1f0
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff81126475>] fput+0x25/0x30
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff81122543>] filp_close+0x63/0x90
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff810615cd>] put_files_struct+0x7d/0xe0
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff81061683>] exit_files+0x53/0x70
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff8106310d>] do_exit+0x17d/0x800
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff811352f8>] ? poll_select_set_timeout+0x88/0xa0
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff810637d5>] do_group_exit+0x45/0xb0
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff81063857>] sys_exit_group+0x17/0x20
Aug 29 17:12:33 servidor5 klogd:  [<ffffffff81012042>] system_call_fastpath+0x16/0x1b
Aug 29 17:12:33 servidor5 klogd: ---[ end trace 37c808f0d4ef1765 ]---
Aug 29 17:12:33 servidor5 klogd: entry->group=(null) inode=(null) wd=4096

Olá pessoal, tenho um speedy com ip fixo e vem nele aquele roteadorzinho wireless !
queria configurar no Tuxfrw !

no roteador do speedy eu desabilitei o wireless e liberei 1 IP somente (q é o q vou usar no tuxfrw), o IP é o 192.168.10.1
esta certo isso ? essa é a forma correta ? pq como vou pegar o IP externo dele ?

então
no arquivo tuxfrw.conf nao estou conseguindo configura-lo:

# EXT_IFACE="ppp0"

# EXTRANET:
EXT_IFACE="eth0"
EXT_IP="192.168.10.1"
EXT_NET=""
EXT_BRO="??"

o q tenho q por em EXT_NET e EXT_BRO ?
grato qq ajuda

Olá pessoal,

tenho um servidor samba chamado S1 e nele um diretorio compartilhado com uma parte da configuracao smb.conf:

write list = @samba
create mode = 0771
create mask = 0771

tenho um outro servidor chamado S2 q montei esse diretorio no fstab assim:

//192.168.20.90/Rede /home/samba/rede cifs username=XXX,password=XXX 0 0

tudo funcionava bem, até q após uma atualização de pacotes no S2
percebi q aconteceu uma mudança qto as permissões !

dentro do S2 qdo eu copio um diretorio inteiro no diretorio montado pelo samba ele diz q nao tenho permissão, mas cria somente o diretorio q eu estava copiando !

bom, resolvi isso alterando no S1 /etc/samba/smb.conf adicionando:

force create mode = 0771
force directory mode = 0771

aí sim ele deixa gravar, mas mesmo assim qdo eu copio o diretorio ele coloca as permissões assim:

drwxrwxr-x

nao teria q ser:

drwxrwx--x ? sem o r no outros ?

grato qq ajuda

apos ligar a impressora: #dmesg

usb 3-1: new full speed USB device using uhci_hcd and address 4
usb 3-1: New USB device found, idVendor=1664, idProduct=019a
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: ARGOX OS-214 plus PPLA
usb 3-1: Manufacturer: ARGOX
usb 3-1: SerialNumber: 000000001

mas nada de aparecer a /dev/usb/lp*

 

Olá pessoal, coloquei uma impressora Termica Argox via USB
ele lista ela com #lsusb

mas não cria o /dev/usb/lp*

essa maquina esta com Mandriva Linux release 2010.2 (Official) for x86_64

tenho uma outra maquina com Mandriva Linux release 2008.1 (Official) for i586 com uma Argox tbem, e nessa aparece a /dev/usb/lp0 qdo liga a impressora.

alguem me da uma ajuda ?

Olá, estou percebendo q meu servidor as vezes da uma travada momentanea !
qto eu rodo o dmesg tem isso:

ps: o Hardware name: S3210SH é a placa mãe !

------------[ cut here ]------------
WARNING: at fs/notify/inotify/inotify_fsnotify.c:129 idr_callback+0x43/0x70()
Hardware name: S3210SH
inotify closing but id=0 for entry=ffff88018859f2a0 in group=ffff88020a13b700 still in idr.  Probably leaking memory
Modules linked in: ppdev parport_pc lp parport nfsd exportfs af_packet nls_iso8859_1 cifs nfs lockd fscache nfs_acl auth_rpcgss sunrpc pcspkr serio_raw e1000 sg i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support e1000e binfmt_misc coretemp ipmi_si ipmi_msghandler usbhid cypress_m8 usbserial hid evdev floppy button thermal processor ehci_hcd uhci_hcd usbcore ata_generic ide_pci_generic ide_gd_mod ide_core pata_acpi ahci ata_piix libata sd_mod scsi_mod crc_t10dif ext3 jbd
Pid: 24908, comm: gam_server Not tainted 2.6.31.5-server-1mnb #1
Call Trace:
 [<ffffffff8115a183>] ? idr_callback+0x43/0x70
 [<ffffffff8105f2c0>] warn_slowpath_common+0x80/0xd0
 [<ffffffff8105f399>] warn_slowpath_fmt+0x69/0x70
 [<ffffffff813a3f6e>] ? wait_for_common+0x15e/0x180
 [<ffffffff8115a183>] idr_callback+0x43/0x70
 [<ffffffff811eba43>] idr_for_each+0x83/0xe0
 [<ffffffff8115a140>] ? idr_callback+0x0/0x70
 [<ffffffff81157bac>] ? fsnotify_put_event+0x4c/0x70
 [<ffffffff8115a127>] inotify_free_group_priv+0x27/0x40
 [<ffffffff81157d38>] fsnotify_final_destroy_group+0x28/0x40
 [<ffffffff81157e41>] fsnotify_put_group+0x91/0xb0
 [<ffffffff8115a3b4>] inotify_release+0x34/0x50
 [<ffffffff8112633f>] __fput+0xdf/0x1f0
 [<ffffffff81126475>] fput+0x25/0x30
 [<ffffffff81122543>] filp_close+0x63/0x90
 [<ffffffff810615cd>] put_files_struct+0x7d/0xe0
 [<ffffffff81061683>] exit_files+0x53/0x70
 [<ffffffff8106310d>] do_exit+0x17d/0x800
 [<ffffffff811352f8>] ? poll_select_set_timeout+0x88/0xa0
 [<ffffffff810637d5>] do_group_exit+0x45/0xb0
 [<ffffffff81063857>] sys_exit_group+0x17/0x20
 [<ffffffff81012042>] system_call_fastpath+0x16/0x1b
---[ end trace 662789b59866dc3a ]---
entry->group=(null) inode=(null) wd=4096

alguem pode me dar um help nisso ?

grato qq ajuda

uso
Mandriva Linux release 2009.1 (Official) for x86_64
2.6.31.5-server-1mnb #1 SMP Tue Nov 3 14:45:44 EST 2009 x86_64 Intel(R) Xeon(R) CPU           X3370  @ 3.00GHz GNU/Linux

ah sim, é q vc só pediu da lp0

segue:

# udevadm test /dev/usb/lp1
This program is for debugging only, it does not run any program,
specified by a RUN key. It may show incorrect results, because
some values may be different, or not available at a simulation run.

parse_file: reading '/etc/udev/rules.d/05-udev-early.rules' as rules file
parse_file: reading '/etc/udev/rules.d/11-hplj10xx.rules' as rules file
parse_file: reading '/etc/udev/rules.d/40-alsa.rules' as rules file
parse_file: reading '/etc/udev/rules.d/40-video.rules' as rules file
parse_file: reading '/etc/udev/rules.d/50-udev-default.rules' as rules file
parse_file: reading '/etc/udev/rules.d/50-udev-mandriva.rules' as rules file
parse_file: reading '/etc/udev/rules.d/55-hpmud.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-cdrom_id.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-dynamic.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-persistent-input.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-persistent-storage-tape.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-persistent-storage.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-raw.rules' as rules file
parse_file: reading '/etc/udev/rules.d/61-block_config.rules' as rules file
parse_file: reading '/etc/udev/rules.d/61-net_config.rules' as rules file
parse_file: reading '/etc/udev/rules.d/61-persistent-storage-edd.rules' as rules file
parse_file: reading '/etc/udev/rules.d/62-create_persistent.rules' as rules file
parse_file: reading '/etc/udev/rules.d/62-net.rules' as rules file
parse_file: reading '/etc/udev/rules.d/64-device-mapper.rules' as rules file
parse_file: reading '/etc/udev/rules.d/64-md-raid.rules' as rules file
parse_file: reading '/etc/udev/rules.d/70-hotplug_map.rules' as rules file
parse_file: reading '/etc/udev/rules.d/70-hplj10xx.rules' as rules file
parse_file: reading '/etc/udev/rules.d/70-libsane.rules' as rules file
parse_file: reading '/etc/udev/rules.d/80-drivers.rules' as rules file
parse_file: reading '/etc/udev/rules.d/88-clock.rules' as rules file
parse_file: reading '/etc/udev/rules.d/90-hal.rules' as rules file
parse_file: reading '/etc/udev/rules.d/95-pam-console.rules' as rules file
parse_file: reading '/etc/udev/rules.d/95-udev-late.rules' as rules file
parse_file: reading '/etc/udev/rules.d/alsa.rules' as rules file
unable to open device '/dev/usb/lp1'


# udevadm info -a -n /dev/usb/lp1

Udevinfo starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/class/usb/lp1':
    KERNEL=="lp1"
    SUBSYSTEM=="usb"
    DRIVER==""
    ATTR{dev}=="180:1"

  looking at parent device '/devices/pci0000:00/0000:00:0b.0/usb5/5-2/5-2:1.0':
    KERNELS=="5-2:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="usblp"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{bInterfaceClass}=="07"
    ATTRS{bInterfaceSubClass}=="01"
    ATTRS{bInterfaceProtocol}=="02"
    ATTRS{modalias}=="usb:v03F0p3D17d0100dc00dsc00dp00ic07isc01ip02"
    ATTRS{ieee1284_id}=="MFG:Hewlett-Packard_MDL:HP LaserJet P1005_CMD:HBS,PJL,ACL_CLS:PRINTER_DES:HP LaserJet P1005_FWVER:20080415_"

  looking at parent device '/devices/pci0000:00/0000:00:0b.0/usb5/5-2':
    KERNELS=="5-2"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{dev}=="189:514"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="c0"
    ATTRS{bMaxPower}==" 98mA"
    ATTRS{urbnum}=="328"
    ATTRS{idVendor}=="03f0"
    ATTRS{idProduct}=="3d17"
    ATTRS{bcdDevice}=="0100"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="5"
    ATTRS{devnum}=="3"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Hewlett-Packard"
    ATTRS{product}=="HP LaserJet P1005"
    ATTRS{serial}=="L406R59"

  looking at parent device '/devices/pci0000:00/0000:00:0b.0/usb5':
    KERNELS=="usb5"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{dev}=="189:512"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="  0mA"
    ATTRS{urbnum}=="47"
    ATTRS{idVendor}=="0000"
    ATTRS{idProduct}=="0000"
    ATTRS{bcdDevice}=="0206"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="5"
    ATTRS{devnum}=="1"
    ATTRS{version}==" 1.10"
    ATTRS{maxchild}=="2"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Linux 2.6.24.7-desktop-3mnb uhci_hcd"
    ATTRS{product}=="UHCI Host Controller"
    ATTRS{serial}=="0000:00:0b.0"
    ATTRS{authorized_default}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:0b.0':
    KERNELS=="0000:00:0b.0"
    SUBSYSTEMS=="pci"
    DRIVERS=="uhci_hcd"
    ATTRS{vendor}=="0x1106"
    ATTRS{device}=="0x3038"
    ATTRS{subsystem_vendor}=="0x0925"
    ATTRS{subsystem_device}=="0x1234"
    ATTRS{class}=="0x0c0300"
    ATTRS{irq}=="11"
    ATTRS{local_cpus}=="ffffffff"
    ATTRS{modalias}=="pci:v00001106d00003038sv00000925sd00001234bc0Csc03i00"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

# udevadm test /dev/usb/lp0
This program is for debugging only, it does not run any program,
specified by a RUN key. It may show incorrect results, because
some values may be different, or not available at a simulation run.

parse_file: reading '/etc/udev/rules.d/05-udev-early.rules' as rules file
parse_file: reading '/etc/udev/rules.d/11-hplj10xx.rules' as rules file
parse_file: reading '/etc/udev/rules.d/40-alsa.rules' as rules file
parse_file: reading '/etc/udev/rules.d/40-video.rules' as rules file
parse_file: reading '/etc/udev/rules.d/50-udev-default.rules' as rules file
parse_file: reading '/etc/udev/rules.d/50-udev-mandriva.rules' as rules file
parse_file: reading '/etc/udev/rules.d/55-hpmud.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-cdrom_id.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-dynamic.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-persistent-input.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-persistent-storage-tape.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-persistent-storage.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-raw.rules' as rules file
parse_file: reading '/etc/udev/rules.d/61-block_config.rules' as rules file
parse_file: reading '/etc/udev/rules.d/61-net_config.rules' as rules file
parse_file: reading '/etc/udev/rules.d/61-persistent-storage-edd.rules' as rules file
parse_file: reading '/etc/udev/rules.d/62-create_persistent.rules' as rules file
parse_file: reading '/etc/udev/rules.d/62-net.rules' as rules file
parse_file: reading '/etc/udev/rules.d/64-device-mapper.rules' as rules file
parse_file: reading '/etc/udev/rules.d/64-md-raid.rules' as rules file
parse_file: reading '/etc/udev/rules.d/70-hotplug_map.rules' as rules file
parse_file: reading '/etc/udev/rules.d/70-hplj10xx.rules' as rules file
parse_file: reading '/etc/udev/rules.d/70-libsane.rules' as rules file
parse_file: reading '/etc/udev/rules.d/80-drivers.rules' as rules file
parse_file: reading '/etc/udev/rules.d/88-clock.rules' as rules file
parse_file: reading '/etc/udev/rules.d/90-hal.rules' as rules file
parse_file: reading '/etc/udev/rules.d/95-pam-console.rules' as rules file
parse_file: reading '/etc/udev/rules.d/95-udev-late.rules' as rules file
parse_file: reading '/etc/udev/rules.d/alsa.rules' as rules file
unable to open device '/dev/usb/lp0'


# udevadm info -a -n /dev/usb/lp0

Udevinfo starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/class/usb/lp0':
    KERNEL=="lp0"
    SUBSYSTEM=="usb"
    DRIVER==""
    ATTR{dev}=="180:0"

  looking at parent device '/devices/pci0000:00/0000:00:0b.0/usb5/5-1/5-1:1.0':
    KERNELS=="5-1:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="usblp"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{bInterfaceClass}=="07"
    ATTRS{bInterfaceSubClass}=="01"
    ATTRS{bInterfaceProtocol}=="02"
    ATTRS{modalias}=="usb:v1664p019Ad0100dc00dsc00dp00ic07isc01ip02"
    ATTRS{ieee1284_id}=="MFG:ARGOX OS-214 plus PPLA _CMD:EPL_MDL:203dpi_CLS:PRINTER_PROTOCOLS:IEEE1284.4_"

  looking at parent device '/devices/pci0000:00/0000:00:0b.0/usb5/5-1':
    KERNELS=="5-1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{dev}=="189:513"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="c0"
    ATTRS{bMaxPower}==" 32mA"
    ATTRS{urbnum}=="84"
    ATTRS{idVendor}=="1664"
    ATTRS{idProduct}=="019a"
    ATTRS{bcdDevice}=="0100"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="8"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="5"
    ATTRS{devnum}=="2"
    ATTRS{version}==" 1.10"
    ATTRS{maxchild}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="ARGOX "
    ATTRS{product}=="ARGOX OS-214 plus PPLA "
    ATTRS{serial}=="000000001"

  looking at parent device '/devices/pci0000:00/0000:00:0b.0/usb5':
    KERNELS=="usb5"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{dev}=="189:512"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="  0mA"
    ATTRS{urbnum}=="39"
    ATTRS{idVendor}=="0000"
    ATTRS{idProduct}=="0000"
    ATTRS{bcdDevice}=="0206"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="5"
    ATTRS{devnum}=="1"
    ATTRS{version}==" 1.10"
    ATTRS{maxchild}=="2"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Linux 2.6.24.7-desktop-3mnb uhci_hcd"
    ATTRS{product}=="UHCI Host Controller"
    ATTRS{serial}=="0000:00:0b.0"
    ATTRS{authorized_default}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:0b.0':
    KERNELS=="0000:00:0b.0"
    SUBSYSTEMS=="pci"
    DRIVERS=="uhci_hcd"
    ATTRS{vendor}=="0x1106"
    ATTRS{device}=="0x3038"
    ATTRS{subsystem_vendor}=="0x0925"
    ATTRS{subsystem_device}=="0x1234"
    ATTRS{class}=="0x0c0300"
    ATTRS{irq}=="11"
    ATTRS{local_cpus}=="ffffffff"
    ATTRS{modalias}=="pci:v00001106d00003038sv00000925sd00001234bc0Csc03i00"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

Olá pessoal, tenho o seguinte problema

tenho 2 impressoras usb na maquina:

#lsusb

Bus 005 Device 003: ID 03f0:3d17 Hewlett-Packard
Bus 005 Device 002: ID 1664:019a

a primeira é uma Hp Laser
a segunda é uma termica Argox !

q ficam em:
/dev/usb/lp0
/dev/usb/lp1

o problema é q qdo ligo a maquina elas ora fica em lp0 ora fica em lp1

qual a melhor maneira de saber em qual /dev/usb/lp? elas estão ?
tem alguma maneira de travar isso ? por exemplo quero q a Argox fique na lp0 sempre, é possível ?

achei um artigo aqui, mas não consegui entender como fazer:
http://ubuntuforums.org/showthread.php?t=1468103

por exemplo: neste momento a HP esta na lp1
# udevinfo -a -p $(udevinfo -q path -n /dev/usb/lp1) |grep ATTRS{product}
ATTRS{product}=="HP LaserJet P1005"

e a Argox esta na lp0
# udevinfo -a -p $(udevinfo -q path -n /dev/usb/lp0) |grep ATTRS{product}
ATTRS{product}=="ARGOX OS-214 plus PPLA "

grato qq ajuda

a principio o q caiu foram 3 maquinas Ruindows conectadas ao Linux via NxClient...
ja verifiquei anti-virus nelas... parece estar normal
vou ver esse Nagios, valeu...

Olá pessoal, hoje observei q 1 usuário perdeu a conexão de rede e mais tarde 2 usuários tbem, ao mesmo tempo !

essa perda é rapidissima, tipo um pique de energia e volta ao normal !

em minha rede tenho uns 30 usuarios

o q poderia ser ? Switch ? teria algum log no Linux para verificar isso ?

grato qq ajuda