Manoel, obrigado pela boa vontade em explicar mas tenho dificuldade de entender CLI. Tentei ler o manual mas precisaria ter algumas informações que não entendo, tipo "raw device" entre outros...

Vou encerrar o tópico, de qualquer forma muito obrigado mais uma vez.

Boa noite ! Existe algum programa para converter o formato rmvb dos filmes para AVI ? É que meu aparelho de DVD não lê rmvb e eu prefiro ver filmes na tela da TV ! Aguardo alguma resposta e obrigado !

Oi Bugrino,

Eu costumava usar o convertxto2vd através do wine e funcionava, só a visualização prévia não estava ok.
Conheço o programa DEVEDE que é nativo do linux mas não me lembro se reconhece rmvb.

Boa Sorte.

[qt3]

checking for Qt... libraries /usr/lib, headers /usr/lib/qt3/include using -mt

O que devo fazer? instalar qt3? Desculpe mas não entendi.

[libinklevel5]

Você pode monitorar os níveis de tintas com dois programas encontrados no Gerenciador de Programas vc os instalou? São eles: libinklevel5 - Library to determine the ink levels of HP and Epson inkjets​
libinklevel is a library for checking the ink level of your printer on a system which runs Linux. It supports printers attached via parallel port or usb.
Most current HP inkjets and several Epson inkjets are supported.
Instalando este vc precisará instalar também: libinklevel-devel - Headers and links to compile against the "libinklevel5" library
This package contains all files which one needs to compile programs using the "libinklevel5" library.

mtink - Status monitor and configuration tool for Epson inkjet printers​
Mtink is a status monitor which allow to get the remaining ink quantity, printing of test patterns, changing and cleaning cartridges.

Pode ainda tentar assim:
escputil -iur /dev/lp0
escputil -iur /dev/usb/lp0

The option -iur is for USB printers. Use -u for
parallel printers. If in doubt escputil --help

Encontrei essas informações em Linux Foundation Org
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/databaseepsonfaq#How_do_I_monitor_the_ink_levels_in_the_printer.3F

Tomara que de algum modo dê certo.
Seja feliz.

Caosacaso, segue o resultado de suas sugestões:
libinklevel5 - já estava instalado,
libinklevel-devel - instalei agora
mtink:problems with printer comunication - na escolha da impressora não há a cx4100
escputil -iur /dev/lp0:Cannot write to /dev/lp0: Recurso temporariamente indisponível
escputil -iur /dev/usb/lp0: Cannot open /dev/usb/lp0 read/write: Arquivo ou diretório não encontrado

Como usar/rodar o libinklevel5? Há alguma interface gráfica?

Obrigado,

y com:
--prefix=/usr/lib/kde4/

vc tem o kde-devel instalado?, quais são os pacotes kde instalados?
rpm -qa | grep kde

saida do comando:
[root@linux wjr]# rpm -qa | grep kde
kdebase4-workspace-googlegadgets-4.4.3-20mdv2010.1
openoffice.org-kde4-3.2-4mdv2010.1
kde4-nsplugins-4.4.3-7mdv2010.1
libkde3support4-4.4.3-16mdv2010.1
libkdewebkit5-4.4.3-16mdv2010.1
libkdesu5-4.4.3-16mdv2010.1
libkdecore5-4.4.3-16mdv2010.1
libakonadi-kde4-4.4.3-3mdv2010.1
kdenlive-0.7.7.1-1mdv2010.1
kdesdk4-core-4.4.3-5mdv2010.1
kde-l10n-pt_BR-4.4.3-1mdv2010.1
libkdecorations4-4.4.3-20mdv2010.1
kde4-style-iaora-common-0.3.1-1mdv2010.1
task-kde4-devel-4.4.3-1mdv2010.1
kde-odf-thumbnail-1.0.0-2mdv2010.1
akonadi-kde-4.4.3-3mdv2010.1
kdebase4-devel-4.4.3-7mdv2010.1
libkdefakes5-4.4.3-16mdv2010.1
kdenetwork4-core-4.4.3-6mdv2010.1
kdebase4-workspace-4.4.3-20mdv2010.1
kdeutils4-core-4.4.3-1mdv2010.1
polkit-kde-1-0.95.1-3mdv2010.1
kdemultimedia4-core-4.4.3-7mdv2010.1
kdeaccessibility4-4.4.3-1mdv2010.1
liblockdev1-1.0.3-9mdv2010.1
kdepimlibs4-core-4.4.3-3mdv2010.1
kdesnake-4.4.3-2mdv2010.1
free-kde4-config-2010.1-22mdv2010.1
libkdegames5-4.4.3-2mdv2010.1
mandriva-kde-icons-1.0.4-11mdv2010.1
libkdepim4-4.4.3-12mdv2010.1
kdegraphics4-core-4.4.3-3mdv2010.1
kdeartwork4-kscreensaver-4.4.3-1mdv2010.1
kdesdk4-scripts-4.4.3-5mdv2010.1
kdebase4-4.4.3-7mdv2010.1
mandriva-kde4-config-common-2010.1-22mdv2010.1
libkdepim-copy4-4.4.3-3mdv2010.1
kdepim4-core-4.4.3-12mdv2010.1
kdegames4-4.4.3-2mdv2010.1
mandriva-kde-translation-2010.1-5mdv2010.1
kdeplasma-addons-4.4.3-4mdv2010.1
kdepim4-4.4.3-12mdv2010.1
python-kde4-4.4.3-6mdv2010.1
task-kde4-4.4.3-1mdv2010.1
kdevelop-pg-qt-0.9.0-1mdv2010.1
kde4-style-qtcurve-1.3.1-1mdv2010.1
kdebase4-workspace-devel-4.4.3-20mdv2010.1
xsettings-kde-0.11-2mdv2010.1
kde-l10n-pt-4.4.3-1mdv2010.1
kdegames4-core-4.4.3-2mdv2010.1
kdeaccessibility4-core-4.4.3-1mdv2010.1
kde4-style-iaora-0.3.1-1mdv2010.1
kdeedu4-core-4.4.3-3mdv2010.1
kde4-splash-mdv-2010.1.0-1mdv2010.1
kdepasswd-4.4.3-7mdv2010.1
kdelibs4-devel-4.4.3-16mdv2010.1
kdepimlibs4-devel-4.4.3-3mdv2010.1
libkdeui5-4.4.3-16mdv2010.1
kdepim4-kresources-4.4.3-12mdv2010.1
compiz-decorator-kde4-0.8.6-1mdv2010.1
libpolkitkdeprivate4-4.4.3-20mdv2010.1
kdebase4-runtime-devel-4.4.3-10mdv2010.1
kdebase4-runtime-4.4.3-10mdv2010.1
kdevelop-pg-qt-devel-0.9.0-1mdv2010.1
kde4-filesharing-4.4.3-6mdv2010.1
task-kde4-minimal-4.4.3-1mdv2010.1
libkde4-style-qtcurve-1.3.1-1mdv2010.1
kdenetwork4-4.4.3-6mdv2010.1
kde4-macros-4.4.3-1mdv2010.1
kdelibs4-core-4.4.3-16mdv2010.1
kdegraphics4-4.4.3-3mdv2010.1
kde4-audiocd-4.4.3-7mdv2010.1

./configure --prefix=`kde4-config --prefix`
 

nosXw,

Obrigado por tentar ajudar. Rodei o comando configure conforme você recomendou mas a mensagem persistiu.

read me:
KInk, a KDE Printer Ink Level Monitor Utility

This little utility represent a frontend for the Markus Heinz's library libinklevel. To run this version of kink you need the version 0.6 of that library, that is freely avaiable at http://home.arcor.de/markusheinz.

Other requirements are:
* QT >= 3.1.2
* KDE >= 3.1.4

I've tested KInk in this environment... if you found that it works even with other library versions, mail me!

See INSTALL for installation instructions.

For any question mail me to moris_ravasio@hotmail.com.

Enjoy!

Install:Basic Installation
==================

   These are generic installation instructions.

   The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation.  It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions.  Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, a file
`config.cache' that saves the results of its tests to speed up
reconfiguring, and a file `config.log' containing compiler output
(useful mainly for debugging `configure').

   If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release.  If at some point `config.cache'
contains results you don't want to keep, you may remove or edit it.

   The file `configure.in' is used to create `configure' by a program
called `autoconf'.  You only need `configure.in' if you want to change
it or regenerate `configure' using a newer version of `autoconf'.

The simplest way to compile this package is:

  1. `cd' to the directory containing the package's source code and type
     `./configure' to configure the package for your system.  If you're
     using `csh' on an old version of System V, you might need to type
     `sh ./configure' instead to prevent `csh' from trying to execute
     `configure' itself.

     Running `configure' takes a while.  While running, it prints some
     messages telling which features it is checking for.

  2. Type `make' to compile the package.

  3. Type `make install' to install the programs and any data files and
     documentation.

  4. You can remove the program binaries and object files from the
     source code directory by typing `make clean'. 

Compilers and Options
=====================

   Some systems require unusual options for compilation or linking that
the `configure' script does not know about.  You can give `configure'
initial values for variables by setting them in the environment.  Using
a Bourne-compatible shell, you can do that on the command line like
this:
     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure

Or on systems that have the `env' program, you can do it like this:
     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure

Compiling For Multiple Architectures
====================================

   You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory.  To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'.  `cd' to the
directory where you want the object files and executables to go and run
the `configure' script.  `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.

   If you have to use a `make' that does not supports the `VPATH'
variable, you have to compile the package for one architecture at a time
in the source code directory.  After you have installed the package for
one architecture, use `make distclean' before reconfiguring for another
architecture.

Installation Names
==================

   By default, `make install' will install the package's files in
`/usr/local/bin', `/usr/local/man', etc.  You can specify an
installation prefix other than `/usr/local' by giving `configure' the
option `--prefix=PATH'.

   You can specify separate installation prefixes for
architecture-specific files and architecture-independent files.  If you
give `configure' the option `--exec-prefix=PATH', the package will use
PATH as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.

   If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.

Optional Features
=================

   Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System).  The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.

   For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.

Specifying the System Type
==========================

   There may be some features `configure' can not figure out
automatically, but needs to determine by the type of host the package
will run on.  Usually `configure' can figure that out, but if it prints
a message saying it can not guess the host type, give it the
`--host=TYPE' option.  TYPE can either be a short name for the system
type, such as `sun4', or a canonical name with three fields:
     CPU-COMPANY-SYSTEM

See the file `config.sub' for the possible values of each field.  If
`config.sub' isn't included in this package, then this package doesn't
need to know the host type.

   If you are building compiler tools for cross-compiling, you can also
use the `--target=TYPE' option to select the type of system they will
produce code for and the `--build=TYPE' option to select the type of
system on which you are compiling the package.

Sharing Defaults
================

   If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists.  Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.

Operation Controls
==================

   `configure' recognizes the following options to control how it
operates.

`--cache-file=FILE'
     Use and save the results of the tests in FILE instead of
     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
     debugging `configure'.

`--help'
     Print a summary of the options to `configure', and exit.

`--quiet'
`--silent'
`-q'
     Do not print messages saying which checks are being made.

`--srcdir=DIR'
     Look for the package's source code in directory DIR.  Usually
     `configure' can determine that directory automatically.

`--version'
     Print the version of Autoconf used to generate the `configure'
     script, and exit.

`configure' also accepts some other, not widely useful, options.

Poste o arquivo README e INSTALL que vem no pacote, também o log inteiro do que vc esta fazendo.

La vai:

log do configure:
[root@linux wjr]# cd /home/wjr/Downloads/kink-0.2.1
[root@linux kink-0.2.1]# ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking for -p flag to install... yes
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether g++ supports -Wmissing-format-attribute... yes
checking whether g++ supports -Wundef... yes
checking whether g++ supports -Wno-long-long... yes
checking whether g++ supports -Wnon-virtual-dtor... yes
checking whether g++ supports -fno-exceptions... yes
checking whether g++ supports -fno-check-new... yes
checking whether g++ supports -fno-common... yes
checking whether g++ supports -fexceptions... yes
checking how to run the C++ preprocessor... g++ -E
checking whether g++ supports -O0... yes
not using lib directory suffix
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes                                                                                       
checking for /usr/bin/ld option to reload object files... -r                                                                               
checking for BSD-compatible nm... /usr/bin/nm -B                                                                                           
checking for a sed that does not truncate output...                                                                                         
checking whether ln -s works... yes                                                                                                         
checking how to recognise dependant libraries... pass_all                                                                                   
checking for egrep... grep -E                                                                                                               
checking for ANSI C header files... yes                                                                                                     
checking for sys/types.h... yes                                                                                                             
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag  works... no
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
appending configuration tag "GCJ" to libtool
checking if gcj supports -fno-rtti -fno-exceptions... (cached) no
checking for gcj option to produce PIC... -fPIC
checking if gcj PIC flag -fPIC works... no
checking if gcj supports -c -o file.o... no
checking whether the gcj linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for strlcat... no
checking if strlcat needs custom prototype... yes - in libkdefakes
checking for strlcpy... no
checking if strlcpy needs custom prototype... yes - in libkdefakes
checking for main in -lutil... yes
checking for main in -lcompat... no
checking for crypt in -lcrypt... yes
checking for socklen_t... socklen_t
checking for dnet_ntoa in -ldnet... no
checking for dnet_ntoa in -ldnet_stub... no
checking for inet_ntoa... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for sys/types.h... (cached) yes
checking for stdint.h... (cached) yes
checking for poll in -lpoll... no
checking CoreAudio/CoreAudio.h usability... no
checking CoreAudio/CoreAudio.h presence... no
checking for CoreAudio/CoreAudio.h... no
checking if res_init needs -lresolv... yes
checking if res_init is available... yes
checking for killpg in -lucb... no
checking for int... yes
checking size of int... 4
checking for long... yes
checking size of long... 4
checking for char *... yes
checking size of char *... 4
checking for dlopen in -ldl... yes
checking for shl_unload in -ldld... no
checking for size_t... yes
checking size of size_t... 4
checking for unsigned long... yes
checking size of unsigned long... 4
checking sizeof size_t == sizeof unsigned long... yes
checking crt_externs.h usability... no
checking crt_externs.h presence... no
checking for crt_externs.h... no
checking for _NSGetEnviron... no
checking for vsnprintf... yes
checking for snprintf... yes
checking for X... libraries /usr/lib, headers .
checking for IceConnectionNumber in -lICE... yes
checking for libXext... yes
checking for pthread_create in -lpthread... yes
checking for extra includes... no
checking for extra libs... no
checking for libz... -lz
checking for libpng... -lpng -lz -lm
checking for libjpeg6b... no
checking for libjpeg... -ljpeg
checking for Qt... libraries /usr/lib, headers /usr/lib/qt3/include using -mt
checking if Qt compiles without flags... yes
checking for moc... /usr/lib/qt4/bin/moc
checking for uic... /usr/lib/qt4/bin/uic
checking whether uic supports -L ... no
checking whether uic supports -nounload ... no
checking if Qt needs -ljpeg... no
checking for rpath... yes
checking for KDE... configure: error:
in the prefix, you've chosen, are no KDE libraries installed. This will fail.
So, check this please and use another prefix!
[root@linux kink-0.2.1]#

Kid,

Istalei o arquivo que você recomendou e através do google fui pesquisando e instalando bibliotecas.

Manoel, estou tentando instalar o kink que é um programa pra impressoras que você havia postado em resposta a meu tópico sobre ink monitor epson.

Cheguei a outra mensagem de erro: in the prefix, you've chosen, are no KDE libraries installed. This will fail.
So, check this please and use another prefix!

já instalei vários arquivos do kde seguindo pesquisas no google mas até agora sem resultados...

Bem, as impressoras da Epson nunca foram muito amigáveis para serem usadas no linux e você terá que pesquisar mesmo e testar vários programas.

Tente também instalar o pacote gutenprint-escputil  e usar o comando

escputil -i -r /dev/usb/lp0

como root (ou algo assim)

diretamente na shell ou indiretamente usando o programa gráfico

http://linux.softpedia.com/get/Printing/Epson-Photo-Ink-Levels-17180.shtml

Manoel,
Comando retorna: Cannot open /dev/usb/lp0 read/write: Arquivo ou diretório não encontrado
Procurei na pasta dev e não há uma subpasta usb...

Baixei a interface gráfica do softpedia indicado por você Manoel mas não sei como executar arquivo kmdr, nunca vi esta estensão.

pessoal,

desabilitei o pulse audio e funcionou!!

Obrigado

Pessoal , estou tentando instalar um monitor de cartucho e após rodar o configure deu esta mensagem:
configure: error: C++ preprocessor "/lib/cpp" fails sanity check

Parece que é falta de algum programa/pacote. Como resolver?

Você apertou o botão "Mixer" que aparece logo abaixo da barra de volume única ? Aparecerá uma janela com mais opções.

Se você estiver usando o pulseaudio (o padrão), pode também ir no menu e clicar em Som e vídeo -> Controle de volume do pulseaudio

Oi Manoel, eu cliquei no botão mixer sim, mas está bem diferente. Não aparecem os volumes do microfone, cd etc...

Manoel,

Instalei as duas sugestões:

mtink: não há a minha impressora na seleção do programa, selecionei outras =>mensagem de erro problems with the printer comunication.
existe um parâmetro de configuração de porta: ??dev/ip0 a 4 = já tentei todos e não funcionou.
Na página do site citado não consta a cx4100 como suported. Existe alguma mais parecida que posso utilizar?


ink:tentei executar mas tenho dificuldade em executar em linha de comando...

[pode]

é, mas não precisa ser M$% , senaum seria preferivel ser uma ilha

bom, se vc não se comunicar com o SO mais usado, vai se comunicar com o que?? é uma opinião particular minha respeito quem não concorda, mas esse tipo de "sociedade" pode ajudar sim.

pode não significa que vai.

idneysilva,

Penso que os sistemas linux deviam buscar interoperabilidade entre si, não com a microsoft. Imagine que ótimo seria se tivessemos programas e pacotes 100% compatíveis entre Ubuntu, Fedora, Mandriva e Suse!! Seria ótimo pois facilitaria para os desenvolvedores criarem drivers e softwares.
Os usuários linux são pouco mais de 1% e deste total se eu quiser construir um driver preciso empacotar um em deb, outro em rpm fedora, outro em rpm mandriva e outro pro Suse!!

Tenho receio de que os desenvolvimentos feitos em parcerias com a MS difundidos no mundo linux possam no futuro terem os direitos de propriedades requeridos pela Janelas...

Salvo esse detalhe, acho conveniente experimentarmos as distribuições e escolher a que melhor nos atende.